Field of Application:
Automotive, construction and industrial machinery shafts, gears, bolts, springs for engines, high-strength to hang girders of suspension bridges, concrete pole & pile reinforcing high strength wires, nails, welding material. Hot rolling low carbon round wire rods, carbon steel wire rods.
Material : SAE1006, SAE1008, SAE1010, Q195; Q215, Q235
Specification : 5.5mm-26mm
Field of Application: 1000-2500Kg/coil
| GB,YB | JIS | DIN(W-Nr) | ASTM | AIST | SAE | BS |
| 05F | 1005 | 1005 | 015A03 | |||
| 08F | 1006 | 1006 | 1006 | 040A04 | ||
| 8 | S09CK | C10(1.0301) | 1008 | 1008 | 1008 | 050A04 |
| CK10(1.1121) | ||||||
| 10F | 1010 | 1010 | 1010 | 040A10 | ||
| 10 | S10C | CK10(1.1121) | 1008 | 1008 | 1010 | 040A10 |
| 050A10 | ||||||
| 060A12 | ||||||
| S10C | 1012 | 1012 | 1012 | 040A12 | ||
| 050A12 | ||||||
| 060A12 | ||||||
| 15F | 040A15 | |||||
| 15 | S15C | C15(1.0401) | 1015 | 1015 | 1015 | 040A15 |
| CK(1.1141) | 050A15 | |||||
| S15CK | Cm15(1.1140) | 060A15 | ||||
| S17C | 1017 | 1017 | 1017 | 040A17 | ||
| 050A17 | ||||||
| 060A17 | ||||||
| 20F | 040A20 | |||||
| 20 | S20C | 1020 | 1020 | 1020 | 050A20 |
Field of Application :
Construction
Production Standards & Steel Grades :
DIN 488 & Bst 420S, Bst 500S
BS 4449 & Gr 460B, Gr B 500B
ASTM A615 & Gr 40, Gr 50, Gr 60
NF A35 & FeE 400, B 500B
Diameter : Ø8.0 mm – Ø50.0 mm Ø6.0 mm available in coil
Length : 6 – 12 meters (18 meters is upon special request
Field of Application :
Construction support
Support frames and columns for trolley ways, lifts and hoists
Mezzanines and platforms
Bridges
Trailer and truck bed framing
Machine bases
I BEAMS, (IPE, IPN), H BEAMS, (HEA, HEB) Grades:
S235JR, S275JR, S355JR acc to EN10025
St 37.2, St 44.2, St 52.3 acc to DIN17100
A36, A529, A572 acc to ASTM
IPE / IPN : 80 – 300, HEA / HEB: 100 – 260
Length : Up to 18 meters
Channels (U, C) Grades :
S235JR, S275JR, S355JR acc to EN10025
St 37.2, St 44.2, St 52.3 acc to DIN17100
A36, A529, A572 acc to ASTM
Sizes : 30 x 15 – 300 x 100
Building structure and projects, workshops; bridges; vehicles as well as building frames, towers, steel derricks.
Sizes for Equal Angles :
18 x 18 x 1.9 – 250 x 250 x 35.0
3/4” x 3/4” x 1/8” – 8” x 8” x 1 1/8”
Sizes for Unequal Angles :
30 x 20 x 3.0 – 250 x 90 x 16.0
1 3/4” x 1 3/4” x 1/8” – 8” x 4” x 5/8”
Length :
Standard Lengths: 6 – 12 meters
Special Length: 4 – 18 meters
Applications :
Shipbuilding, Electric power transmission, general fabrication and repairs in industrial maintenance, agricultural implements, transportation equipment.
Grades:
S235JR, S275JR, S355JR acc to EN10025St 37.2, St 44.2, St 52.3 acc to DIN17100
A36, A529, A572 acc to ASTM
C45, C60E acc to EN10083
Sizes :
Sizes : Flat Bars 10×3.0 – 150×50 mm Length up to 18 meters
Square Bars : 6×6 – 80×80 mm Length up to 12 meters
Round Bars : Ø4.0 – Ø220.0 mm Length up to 12 meters
